Descripción
Colocador magnético de cuchillos para cepilladoras y ensambladoras.
Plantilla de ajuste de altura de cuchillas cepilladoras y ensambladoras, calibrador de ajuste de cuchillas cepilladoras
Coloque las cuchillas cepilladoras de forma rápida y precisa con estas plantillas de ajuste magnetizadas. La plantilla mantiene los cuchillos firmemente en su posición mientras ambas manos quedan libres para ajustar las guías y el cabezal de corte.
Colocador de cuchillos universal.
Características:
- Mantiene los cuchillos en perfecta alineación mientras se fijan.
- Se adapta a cuchillas cepilladoras de 12" a 26".
- Deja las manos libres para ajustar las guías y el cabezal de corte
Mantenga los cuchillos en perfecta alineación con micro ajustable a 0,001 pulgadas
Mantenga los dedos a salvo de las cuchillas afiladas
Permite ajustar la chaveta y el cabezal de corte con manos libres
Ahorra tiempo, molestias y esfuerzo
Vienen en pareja, en una caja de madera.
El mejor calibre de las plantillas de ajuste de cuchillas cepilladoras y ensambladoras sujeta las cuchillas cepilladora y ensambladora de forma rápida, precisa y segura con innovadoras plantillas de ajuste magnetizadas de grado industrial. El diseño revolucionario de esta plantilla de ajuste mantiene el cuchillo firmemente alineado para ajustarlo y apretarlo con manos libres, lo que permite un mayor nivel de seguridad, eficiencia y mano de obra. Las plantillas mantienen los cuchillos en perfecta alineación con micro ajustable a 0,001 pulgadas. Vienen en pareja, en una caja de madera.
- Plantillas de ajuste del vernier de la hoja cepilladora de alta precisión
- Pies magnéticos para fijar al bloque de corte y sujetar la cuchilla.
- Las hojas se sujetan de forma segura para permitir un fácil bloqueo en su lugar.
- Los pies giratorios se adaptan a diámetros de bloques de 75 a 125 mm.
- Precisión ajustable micrométrica con ajustes bloqueables.
DISPOSITIVO DE FIJACIÓN MAGNÉTICO PARA CUCHILLAS CEPILLADORAS
Para juego de plantillas de ajuste de cuchillas cepilladoras Charnwood
Medidor de ajuste magnético de la cuchilla cepilladora: las mejores cuchillas no funcionarán bien a menos que estén
correctamente colocado y alineado. Los imanes permanentes incorporados sujetan tanto el bloque cepillador como
los cuchillos mientras utiliza los ajustes integrales para colocar los cuchillos en la posición perfecta
- ajustable en incrementos de 0,1 mm.
1. Tope cerámico magnético
2. Uniones con conectores magnéticos
3. Tope de profundidad de precisión con incrementos de 0,1 mm
El juego se suministra en una caja de madera con 2
posicionadores Tres opciones para el ajuste de las cuchillas: Posicionamiento en el cuerpo del portaherramientas con
marcar en el cuchillo original; Posicionamiento sobre el cuerpo del portaherramientas fijado con uno de
los medidores suministrados; Posicionamiento directo sobre la mesa de la máquina y el cuerpo portaherramientas.
Este juego de plantilla de ajuste de cuchillas para cepilladora y regruesadora ofrece un método simplificado y rápido para ajustar la altura de las cuchillas de corte después de afilarlas o cambiarlas. Las plantillas se pueden utilizar con la mayoría de las cepilladoras, regruesadoras o máquinas combinadas con acceso abierto al bloque de corte.
Tenga en cuenta que esta plantilla no se puede utilizar con máquinas con mesas fijas de aluminio, ya que no son magnéticas.
Características:
Al volver a colocar las cuchillas cepilladoras, lo más importante es que estén reajustadas y colocadas correctamente.
Cada cuchilla debe sobresalir del bloque de corte en la misma medida para dar un corte limpio, de lo contrario provocarán un desequilibrio y una vibración que podría dañar la máquina y también provocará un corte desigual.
Estas plantillas están equipadas con potentes imanes que las sujetarán al bloque de corte.
Los pies giran para tener en cuenta los bloques de corte de diferentes diámetros.
El cuchillo en sí se sujeta a otro imán que se puede ajustar en altura.
La altura se puede ajustar con extrema precisión con graduaciones de hasta 0,15 mm.
Con el cuchillo suelto en el bloque, asegúrese de que ambas plantillas de ajuste lean lo mismo, luego bloquee las hojas en el bloque y repita con los otros cuchillos.
Una vez que las plantillas estén configuradas y bloqueadas en la configuración exacta para su máquina, la configuración se guardará para la instalación futura de cuchillas nuevas o reafiladas.
Resumen de características/especificaciones:
Diámetro mínimo del bloque de corte: 75 mm
Diámetro máximo del bloque de corte: 125 mm
Número de cuchillos: 2-4
Ajuste de altura: 22 mm (aproximadamente 7/8";)
Incrementos de ajuste: 0,15 mm (0,0059 ")
Excelente dispositivo de ajuste adecuado para todas las marcas y modelos de cepilladoras de superficies, ensambladoras, regruesadoras y cepilladoras/regruesadoras combinadas.
Estas plantillas de ajuste de cuchillas magnéticas se entregan en una práctica caja de madera.
La proyección de la cuchilla se puede ajustar con precisión gracias a los topes ajustables con ajustes de 0,1 mm.
El dispositivo ha sido diseñado con imanes permanentes que se adhieren al bloque cortador o a la mesa cepilladora y no a la cuchilla, de modo que ambas manos quedan libres para colocar y apretar las cuchillas.
No es necesario mantener presionados los dispositivos de configuración.
Alta precisión de ajuste que garantiza una alineación perfecta de la hoja y un acabado superficial.
Dispositivo que ahorra tiempo al montar y configurar las cuchillas de la cepilladora
Payment & Shipping
CA PROP 65 ADVERTENCIA
Let customers speak for us
Very very satisfied with this purchase! Talk about a game changer! Noise difference is unbelievable! Not to mention how well it cuts! Installation was pretty simple and straight forward. Fit perfectly and works even better!
It worked great! It cut straight and clean on a piece of 1 1/4" heavy DOM. Went nice a smooth with no heating of the part. For the money, this is a good deal.
If you need an everyday construction site set of blades, look no further than these. I cut approximately 30 brace blocks from 2x4s for a deck. One blade did 60 cuts like the first cut. I even did a one vertical cut on a 2x8 at the end. All were done on pressure treated lumber, I’m impressed. Can’t beat the price and I will be ordering more. 6/12 tpi for those who want to know.
These work like any other blade that I have purchased. I have not necessarily found any great difference between the most expensive brands and the lower priced brands since I tend to challenge the blade with all types of materials. I would lump this in the mix and buy these based upon the price. At a dollar and a half, for each blade, these are on the very affordable side of what is available. I have sometimes used long metal blades for demolition if I have a large amount of metal embedded (could be conduit, etc.).
I don't often review but I have gone through many planer blade sets for this planer. I'm very glad there is an exact fit replacement as it seems Dewalt has stopped selling blade replacements. These seem to be an exact fit. All dimensions are exact except they are consistently .02 grams heavier and there's no pyramid stamp. I only did the weight because I could not find discrepancies (LxWxHxT). I read a review that they are not as good as the original, don't last as long. May be slightly softer material, IDK...TBD. I will get back to you on this.For now I am giving it 5 stars. I'm on my 9th double pack of blades from Dewalt. That's 4 blade sets per double pack. 36 blade changes. Excellent planer. Glad FoxBC picked up this replacement part.Price = matchesFit = matchesLife & cut = TBDHope this helps, Cheers!
FOXBC 9 Inch 6/12 TPI Demolition Reciprocating Saw Blades for Nail-Embedded Wood, Bi-Metal, 25-Pack with Case --- Received 25 blades as advertised. Haven’t had occasion to use one yet but they are thinner metal, but solid and sharp. Demolition blades are usually bulkier than these. Fit easily into my Dewalt battery operated reciprocating. saw. Plastic case is adequate for keeping them together but doesn’t look like it would take much abuse.
Partial review only, as I need to put these through their paces. The blades are well formed and have no obvious flaws. No curves, errors, etc. The case could use a bit more strength, though, as both pieces of mine are cracked.
I have an old craftsman jointer that desperately needed blades. I bought these and am super happy. Swapped the old ones out and the jointer is back to life. Blades were dharp and flat which is all that's necessary. I'll buy this brand again when I need another set!
Will get dull a little faster then their heated counterparts. However for the first time in 5 sets of blade I’ve just rotated these and did not see a single chip in the blades. This usually happens with any other blades I’ve tried including original DW735 13” blades.
Im going to use these from now on only, needs to be rotated just a little more often, but at the price point they are great. If you start questioning their performance then rotate/replace and go again with a fresh cut. 5 stars!
Customer image
These last almost as long as the expensive ones, they stay strait just as well, and cut very well. Even though the blade will dull slightly faster (i didn't really notice this until i measured the cuts and compared, it's not much), the amount of cut per dollar is higher than the expensive blades, and the amount of efficient cutting per dollar is higher too, since you are working with a fresher blade more of the time.To put it in perspective, the guys that were doing the demo work did not reach 6 inches further to get the expensive blades, they just grabbed these (they were both sitting on the supplies table). These guys hate changing blades and such, because they see it as wasted time, so for these to choose these much more economical blades tells me that I'll be buying these more often.One note, they come with an expandable blade case, but the plastic is "so-so", you probably won't be keeping the case and putting more blades in it like you would some similar cases that you buy separately, but at this price, the case is, essentially, a freebie with the blades, so it's much appreciated.
Quality. Good weight
there are more expensive, higher quality blades available, but this is still a great crosscutting blade and very much worth the money.
I got this for planning old rough Purple Heart after I destroyed the factory knifes ..I’ve excluded before and after photos with no sanding straight out of the planner
Nice container. Worth restoring with a bit of duct tape.I like to test these kinds of saw blades in a hand-powered handle and in a basic battery-powered saw. This gives me a pretty good idea of how well they perform without too easily overheating, which is murder on cutting edges.I'm not sure it shows very well in these pictures, but the kerf produced by hand cutting is wider than that produced with a power saw. I would have liked to see a bit wider kerf, which would have allowed the coating of these blades to last a bit longer than it does.The steel I cut was a medium hard framing steel, as was the deck screw, which is much harder than typical wood fasteners.I'd choose a bimetal blade with 8-tpi for wood demolition unless a lot of deck screws are involved. These blades are best suited for metal, as described.I was able to make a low angle plunge cut in wood and soft metal. For harder metals intended it be cut with this blade, a plunge cut can be started with a Dremel tool pretty easily.Recommended on price and general utility.
Works great
What customers think about the store
The store offers high-quality and affordable replacement blades, knives, and accessories for woodworking tools. Customers praise the sharp cutting edges, precise fit, smooth operation, and long-lasting durability of the products. Many find them comparable or e...